ElpiAuto285/70R17 vs 295/70R17
295/70R17 is 0.55″ (14 mm) taller than 285/70R17, a 1.7% difference in overall diameter — right at the edge of the ±3% band — fine on most cars, but check clearance at full lock and full suspension compression.
| Measurement | 285/70R17 | 295/70R17 | Difference | % |
|---|---|---|---|---|
| Overall diameter | 32.71″ | 33.26″ | +0.55″ | +1.7% |
| Section width | 11.22″ | 11.61″ | +0.39″ | +3.5% |
| Sidewall height | 7.85″ | 8.13″ | +0.28″ | +3.5% |
| Circumference | 102.76″ | 104.49″ | +1.73″ | +1.7% |
| Revs per mile | 616.6 | 606.4 | −10.2 | −1.7% |
| Revs per km | 383.1 | 376.8 | −6.3 | −1.7% |
Speedometer: with 285/70R17 as the original, 295/70R17 makes an indicated 60 mph really about 61.0 mph, and the axle sits ~0.28″ higher.
Reading this comparison
The overall diameter is what matters here: 295/70R17 is the taller tire. It sets ride height, gearing and how far the tire travels per revolution — which is what the speedometer and odometer count. Width and sidewall change fit and feel (a wider tire needs a wider wheel and more clearance; a shorter sidewall sharpens steering) but not the gearing.
Figures are geometric estimates from the size codes; real moulded tires vary by brand by 1–3%. Confirm load rating, wheel width and physical clearance on your vehicle before fitting. To compare any other two sizes, use the tire size comparison tool; to decode one size and see what else fits its wheel, the tire size calculator.